Flash BossMonitor firmware directly from your browser.
No software to install — just plug in and click.
1
Use Chrome or Edge on Windows or Mac (Firefox/Safari not supported)
2
Plug your board into your PC via USB, then click Install BossMonitor below and select the COM port
3
Wait ~2 minutes for flashing to complete. The board will reboot automatically.
4
On your phone or tablet, connect to the BossMonitor-Recovery WiFi network
5
Browse to http://192.168.15.1 — tap Configure WiFi and enter your home network credentials. The board reboots onto your router.
6
Reconnect your phone to your home WiFi. Browse to the board's IP address and tap Activate License. You'll be taken to luxbosspro.com to enter your product key.
7
Download license.dat and upload it to the board. BossMonitor is now fully activated.